| Specification |
Type: Mechanical;
Number of Switch: Single Control Switch;
Structure: Press-Type Spring Type;
Usage: Control Switch;
Application: Vehicles;
Explosion-proof Type: Flameproof;
Contact: Normally Open;
Contact Type: Type a Contact;
Detection Method: Correlation Type;
Brand: No;
Material: Metal;
Custom Processing and Customization: Yes;
|
Type: SPDT;
Usage: Control Switch;
Application: Commercial, Industrial;
Brand: Dwyer;
Series: ADPS;
Set Point Range: 20-300PA;
Approx. Dead Band @ Min Set Point in w.c: 0.04 (10);
Approx. Deadband @ Max Set Point in w.c.: 0.05 (12);
Service: Air and non-combustible, compatible gases;
Wetted Materials: Diaphragm material: Silicone; Housing material: PO;
Temperature Limits: Process and ambient temperature from -4 to 185°F (;
Storage: -40 to 185°F (-40 to 85°C);
Pressure Limits: Max. operating pressure: 40 in w.c. (10 kPa) for a;
Electrical Rating: Max. 1.5 A res./0.4 A ind./250 VAC, 50/60 Hz; Max.;
Electrical Connections: Push-on screw terminals. M20x1.5 with cable strain;
Process Connections: 5/16"(7.94 mm) outside diameter tubing, 1/4" (6.0;
Enclosure Rating: NEMA 13 (IP54);
Mounting Orientation: Vertically, with pressure connections pointing dow;
Mechanical Working Life: Over 106 switching operations;
|
Type: SPDT snap switch;
Application: Industrial;
Brand: Dwyer;
Series: DX;
Service: Compatible gases and liquids.;
Wetted Materials: Connection: Brass; Diaphragm: Fluoroelastomer;
Temperature Limits: 30 to 140°F (-1 to 60°C);
Pressure Limits: 200 psig (13.8 bar). Continuous single side only p;
Enclosure Rating: Weatherproof UL type 4X (IP65);
Repeatability: ±2% of full range;
Electrical Rating: 5 A @ 125/250 VAC, 5 A res. @ 30 VDC;
Electrical Connection: Removable terminal block;
Conduit Connectio: 0.871" diameter hole for 1/2" conduit fitting;
Process Connection: 1/4" NPT female;
Mounting Orientation: Ports on horizontal plane, ±10°;
Set Point Adjustment: External screw;
Housing Materials: Body: Aluminum; Housing: Polycarbonate; Cover: 300;
Humidity Limit: 80% (non-condensing);
|
Type: SPDT snap switch;
Application: Industrial;
Brand: Dwyer;
Series: DX;
Service: Compatible gases and liquids.;
Wetted Materials: Connection: Brass; Diaphragm: Fluoroelastomer;
Temperature Limits: 30 to 140°F (-1 to 60°C);
Pressure Limits: 200 psig (13.8 bar). Continuous single side only p;
Enclosure Rating: Weatherproof UL type 4X (IP65);
Repeatability: ±2% of full range;
Electrical Rating: 5 A @ 125/250 VAC, 5 A res. @ 30 VDC;
Electrical Connection: Removable terminal block;
Conduit Connectio: 0.871" diameter hole for 1/2" conduit fitting;
Process Connection: 1/4" NPT female;
Mounting Orientation: Ports on horizontal plane, ±10°;
Set Point Adjustment: External screw;
Housing Materials: Body: Aluminum; Housing: Polycarbonate; Cover: 300;
Humidity Limit: 80% (non-condensing);
|
Type: Mechanical;
Number of Switch: Single Control Switch;
Structure: Amplifier Built-in Type;
Usage: Control Switch, Change-over Switch;
Application: Industrial, Vehicles;
Explosion-proof Type: Flameproof;
Contact: Normally Open;
Contact Type: Type c Contact;
Detection Method: Correlation Type;
Brand: Huatian;
Form of Pressure: Gauge Pressure, Absolute Pressure;
Range: -0.1kpa-0kpa-10kpa...60MPa;
Operating Voltage: 12VDC~30VDC;
Medium Temperature: -30℃-60℃;
Output Signal: Relay Contact;
Accuracy: ±0.25%Fs, ±0.5%Fs;
Response Time: ≤3ms (10%-90%);
Overload Capacity: ≤200%Fs (<10MPa), ≤150%Fs (≥10MPa);
Measuring Medium: Fluids Compatible with SS304, SS316L,or Ceramics;
|
