| Specification |
Tile Type: Colored Steel;
Condition: New;
Customized: Customized;
Usage: Roof, Wall;
Transmission Method: Hydraulic Pressure;
Material: Pre-Painted Galvanized Steel(PPGI);
Material Thickness: 0.3-0.8mm;
Main Motor: 7.5+4kw;
Stations: 18 Steps;
Cutting Material: Cr12MOV;
|
After-sales Service: Machine Is Maintained Free of Charge for 12months;
Warranty: 18 Months;
Tile Type: Glazed Steel;
Condition: New;
Customized: Customized;
Usage: Roof, Wall, Floor;
Transmission Method: Machinery;
Power Supply: 380V, 50Hz, 3 Phrases or at Buyer's Requirement;
Control System: PLC(Imported Brand);
Diameter of Pinch Rolls: 340mm*2 Pieces;
Material: Thin Galvanized Sheets;
Productivity: 30--36 Sheets From 0.14--0.20mm;
Barrel Length: 3600 mm;
Diameter of Corrugation Rolls: 380mm*2 Pieces;
Exit Table: It Is Set to Receiving and Supporting The Corrugat;
Driven System: It Is Driven by an a.C. Motor Through a Gear Reduc;
|
After-sales Service: Machine Is Maintained Free of Charge for 12months;
Warranty: 18 Months;
Tile Type: Glazed Steel;
Condition: New;
Customized: Customized;
Usage: Roof, Wall, Floor;
Transmission Method: Machinery;
Power Supply: 380V, 50Hz, 3 Phrases or at Buyer's Requirement;
Control System: PLC(Imported Brand);
Diameter of Pinch Rolls: 340mm*2 Pieces;
Material: Thin Galvanized Sheets;
Productivity: 30--36 Sheets From 0.14--0.20mm;
Barrel Length: 3600 mm;
Diameter of Corrugation Rolls: 380mm*2 Pieces;
Exit Table: It Is Set to Receiving and Supporting The Corrugat;
Driven System: It Is Driven by an a.C. Motor Through a Gear Reduc;
|
After-sales Service: Online Support, Free Spare Parts;
Warranty: 2 Years;
Tile Type: Light Keel Steel;
Condition: New;
Customized: Customized;
Usage: Roof, Wall;
Transmission Method: Chain;
Thickness: 0.5-1.2mm;
Cutting Type: Servo Motor Non Stop Cutting;
Raw Material: PPGI/Gi;
Cutting Blade Material: Cr12;
Drive: Main Drive Uses Chain;
Side Wall Structure: High-Precision Cast Steel Arch (Thickness 45mm) Fr;
Main Forming Machine Power: 5.5kw with Siemens Brands;
Reducer: K77-4 (Tylong Cycloid Pinwheel Reducer);
Main Frame: 350h Steel;
Control System: PLC(Imported Brand);
Total Power: 5.5+4kw;
Servo Motor: 1 Set;
Forming Speed: 15-25m/Min;
Voltage: 380V 50Hz, 3 Phase;
|
After-sales Service: Engineer of The Roll Forming Machine;
Warranty: One Year;
Tile Type: Glazed Steel;
Condition: New;
Customized: Customized;
Usage: Roof;
Transmission Method: Machinery;
Forming Rows: 16rows;
Cutting Blade Material: Cr12;
Material Thickness: 0.4---0.8 mm;
Control System: Servo Cutting;
Profiles: Drywall System;
Shaft Material: 45# Steel Forging Treatment;
Shaft Diameter: 50mm;
Transmission: Worm-Gear Box;
Productivity: 0-100m/Min;
|
