| Specification |
Application: Aerospace Industry, Automotive Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Powder Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: 1 Year;
Substrate Type: Galvanized/Aluminum-Zinc/Zinc-Aluminum-Magnesium,;
Process Speed(M/Min): 20-120;
Substrate Thickness(mm): 0.1-2.0;
Substrate Width(mm): 700-1650;
Energy Medium: Water/ Electricity/ Gas;
Technology: High-Speed Electrostatic;
|
Application: Aerospace Industry, Appliance Industry, Automotive Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Powder Coating: 40-120μm (Error ±5μm);
Liquid Coating: 15-60μm (Error ±3μm);
E-Coating: 10-30μm (Error ±2μm);
Power Supply: 380V/50Hz Three-Phase AC Power;
Total Installed Power: 80-200kw;
Pressure: 0.6-0.8MPa;
Dew Point: ≤ -40°C;
Oil Content: ≤ 0.1mg/M³;
Solid Impurities: ≤ 1μm;
Workpiece Materials: Steel/Alloy/Iron/ Plastic/Wood;
Workpiece Shapes: Flat Panels/ Cylindrical Objects/ Irregular Shapes;
Application Scenarios: Home Appliance/Automotive Parts/Building Profiles;
Temperature: 5-40°C;
Relative Humidity: ≤ 85%(Non-Condensing);
Certifications & Compliance: CE, ISO9001, Sg,EU RoHS;
|
Application: Aerospace Industry, Appliance Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Enamel Layer Thickness: 80-150μm (Tolerance ±3μm);
Coating Uniformity: ≥98% (No Localized Thickness Variations);
Firing Temperature: 800-950°C (Temperature Control Accuracy ±2°C);
Furnace Temperature Uniformity: ≤±5°C;
High-Temperature Enamel Firing Time: 4-10 Min, Adjustable Based on Workpiece Thickness;
Degreasing Tank Temperature: 50-60℃ (Treatment Time 15-20 Min);
Phosphating Film Thickness: 5-8μm (Adhesion ≥5n/Cm, Compliant with ASTM D3359;
Applicable Workpieces Categories: Water Heater Liners, Cast Iron Pots etc;
Applicable Workpieces Materials: Carbon Steel, Cast Iron, Stainless Steel (304/316L;
Production Capacit: 80-350 Units/H/Module (Based on 50L Inner Tank);
Energy Consumption Level: <=8kw.H/Unit;
Firing Furnace Thermal Efficiency: ≥85% (Including Waste Heat Recovery);
Power Supply: 440/380V/50Hz, 220V/60Hz (Customizable);
Temperature: 5-40°C;
Relative Humidity: ≤85% (Non-Condensing);
|
Application: Aerospace Industry, Appliance Industry, Automotive Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Furnace Temperature: 830-900℃ Optimal Range for Enamel Frit Melting;
Temperature Control Accuracy: ±2℃;
High-Temperature Zone: ≤±5℃ (at Any Point in The Furnace);
Degreasing Temperature: 50-60℃ (Processing Time 15-20min);
Pickling Temperature: 40-50℃ (for Rusty Workpieces);
Drying Temperature: 80-120℃ (Drying Time 10-40min);
Power Supply: 440/380V/50Hz, 220V/60Hz;
Workpiece Materials: Carbon Steel/ Stainless Steel;
Applicable Workpieces: Water Heater Tank;
Physical Pre-Treatment: Shot Blasting/ Manual;
Enamel Dry Film Thickness: 150-500μm;
Adhesion: ≥5n/Cm;
Salt Spray Resistance: ≥500 Hours;
Capacity: 80-300 Pieces / Hour (50L Tank);
Energy Consumption Per Unit Product: ≤8 Kw·H / Piece;
|
Application: Aerospace Industry, Appliance Industry, Automotive Industry, Construction Industry, Electronics Industry, Furniture Industry;
Coating Type: Anti-corrosion Coating;
Heating system: Diesel, electric, gas, LPG;
Warranty: One-Year Warranty;
Furnace Temperature: 830-900℃ Optimal Range for Enamel Frit Melting;
Temperature Control Accuracy: ±2℃;
High-Temperature Zone: ≤±5℃ (at Any Point in The Furnace);
Degreasing Temperature: 50-60℃ (Processing Time 15-20min);
Pickling Temperature: 40-50℃ (for Rusty Workpieces);
Drying Temperature: 80-120℃ (Drying Time 10-40min);
Power Supply: 440/380V/50Hz, 220V/60Hz;
Workpiece Materials: Carbon Steel/ Stainless Steel;
Applicable Workpieces: Water Heater Tank;
Physical Pre-Treatment: Shot Blasting/ Manual;
Enamel Dry Film Thickness: 150-500μm;
Adhesion: ≥5n/Cm;
Salt Spray Resistance: ≥500 Hours;
Capacity: 80-300 Pieces / Hour (50L Tank);
Energy Consumption Per Unit Product: ≤8 Kw·H / Piece;
|
