| Specification |
Type: Insert Type;
Measuring Medium: Gas,Liquid, Water;
Display Type: Non-Display;
Site Display: Not Site Display;
Accuracy: 0.5;
IP Rating: IP65;
Customized: Customized;
Power Supply: 24VDC;
|
Measuring Medium: HUMIDITY/TEMPERATURE;
IP Rating: IP20;
Customized: Non-Customized;
Condition: Original New;
Power Requirements: 4-20 mA loop powered outputs: 10-35 VDC; 0-5/10V o;
Dew Point Temperature Range: -20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8 to;
Temperature Measurement Range: -40 to 140°F (-40 to 60°C) for thermistor and RTD;
Hysteresis: ±0.8%;
Repeatability: ±0.1% typical;
Temperature Limits: Operating: -40 to 140°F (-40 to 60°C); Storage: -4;
Compensated Temperature Limits: -4 to 140°F (-20 to 60°C);
Output Signals: 4-20 mA loop powered outputs: 4-20 mA, 2 channels;
Solid State Band Gap Temperature Sensor: Switch selectable, -20 to 140°F (-28.9 to 60°C); 0;
Response Time: 8 s;
Electrical Connections: Screw terminal block;
Drift: <0.25% RH/year;
RH Sensor: Capacitance polymer;
Enclosure Material: White polycarbonate (European); Warm gray polycarb;
|
Measuring Medium: HUMIDITY/TEMPERATURE;
IP Rating: IP20;
Customized: Non-Customized;
Condition: Original New;
Power Requirements: 4-20 mA loop powered outputs: 10-35 VDC; 0-5/10V o;
Dew Point Temperature Range: -20 to 140°F (-28.9 to 60°C); 0 to 100°F (-17.8 to;
Temperature Measurement Range: -40 to 140°F (-40 to 60°C) for thermistor and RTD;
Hysteresis: ±0.8%;
Repeatability: ±0.1% typical;
Temperature Limits: Operating: -40 to 140°F (-40 to 60°C); Storage: -4;
Compensated Temperature Limits: -4 to 140°F (-20 to 60°C);
Output Signals: 4-20 mA loop powered outputs: 4-20 mA, 2 channels;
Solid State Band Gap Temperature Sensor: Switch selectable, -20 to 140°F (-28.9 to 60°C); 0;
Response Time: 8 s;
Electrical Connections: Screw terminal block;
Drift: <0.25% RH/year;
RH Sensor: Capacitance polymer;
Enclosure Material: White polycarbonate (European); Warm gray polycarb;
|
Measuring Medium: GAS;
Accuracy: ±5% of reading;
IP Rating: IP66;
Customized: Non-Customized;
Condition: Original New;
Service: Air and compatible gases, any type of particulate;
Wetted Materials: 316L SS, silicone, and PTFE;
Enclosure: Powder coated aluminum;
Particulate Size: 0.3 microns and higher;
Detection Range: 5 to 5000 pA (6 selectable range options);
Temperature Limits: Ambient: -40 to 145°F (-40 to 63°C); Process: -40;
Pressure Limit: 30 psi (2 bar);
Minimum Air Velocity: 300 ft/min (1.52 m/s);
Output Signal: 4-20 mA;
Power Requirements: 12-28 VDC;
Electrical Connection: Two 1/2" female NPT electrical entries or two M20;
Terminal Block: Removable (16 to 20 AWG wire);
Mounting Orientation: Any;
Averaging Time: 1 to 360 s (10 selectable options);
|
Measuring Medium: HUMIDITY/TEMPERATURE;
IP Rating: IP66;
Customized: Non-Customized;
Condition: Original New;
Power Requirements: Communications model: 14 to 35 Vdc or 10 to 32 Va;
Humidity Measurement Range: 0 % to 100 % humidity;
Temperature Measurement Range: -40 °C to 60 °C (-40 °F to 140 °F);
Humidity Sensor Accuracy: Model specific, ±2 % or ±3 %, at 10 % - 90 % RH an;
Temperature Sensor Accuracy, Solid State: ±0.9°F @ 77°F (±0.5°C @ 25°C);
Temperature Sensor Accuracy, Thermistor: ±0.2°C @ 25°C (±0.36°F @ 77°F) (analog models onl;
Temperature Sensor Accuracy, RTD: DIN Class B; ±0.3°C @ 0°C (±0.54°F @ 32°F) (analo;
Resolution: Relative humidity: 0.1%; temperature: 0.1°F/°C; a\;
Humidity Analog Output: 4-20 mA or 0-5 V dc, 0-10 V dc at 5 mA max, field;
Active Temperature Analog Output: 4-20 mA or 0-5 V dc, 0-10 V dc at 5 mA max, fiel;
Passive Temperature Sensors: Types II and III: Solid state band gap; Curves A,;
Termination Load: 120 Ω (communicating models only);
Operating Temperature Range: -40°C to 60°C (-40°F to 140°F); With LCD: -20°C t;
Wiring Connection: Removable terminal block;
|
