| Specification |
Noise: <102dB;
Hi-Fi: Not Hi-Fi;
Activity: Active;
Operation Mode: Wire / Remote Control;
Speaker System: Optional Combination;
Speaker Material: Wood;
Application: Commercial, Home, Commercial, Banquet Hall,Church,Conference Room;
Monitor: No Screen;
THD: <0.005%;
Column Speaker Frequency Response: 100Hz—20kHz;
Nominal Impedance: 8 Ohms;
Sensitivity: 95db;
Rated Power: 200W/600W;
Subwoofer Frequency Response: 40Hz—400Hz;
Maximum Sound Pressure Level: 118db/ 123db;
|
Activity: Active;
Operation Mode: Wire / Remote Control;
Speaker Material: Aluminum;
Application: Commercial, Home, Conference;
RMS Power: 30W;
Max Power: 60W;
Power Requirements: 220-240VAC or 24VDC;
Spl at Rated Power: 107dB;
Freq. Response: 110Hz-16kHz;
Dispersion Angel: 180X50 Degree;
Product Size: 145X145X545mm;
Installation: Wall Mounted;
Enclosure Material: Aluminum;
Weight: 5kg;
Finish: Khaki;
Speakers: 4"X3 Full Range;
|
Noise: <95dB;
Activity: Active;
Operation Mode: Wire / Remote Control;
Speaker System: 2.0 Channel;
Speaker Material: Wood;
Application: Commercial, Home, Conference;
THD: >0.01%;
Total Output Power: 60 Watts Thd = 10%, 1kHz;
S/N Ratio: > 80dB;
Frequency Response: 60Hz-20kHz;
Input: 2 Ways RCA Input;
Voltage: ~230V / 50Hz;
Drivers: 4inch Woofer with Bass Reflex X 2 + 1inch Tweeter;
Controls on Cabinet: Volume +/-, Bass +/-, Treble +/-;
Dimensions (Hxwxd): 240X140X172mm;
Net Weight (Pair): 2.9kg;
|
Application: Commercial, Professional Use;
THD: <0.005%;
Dante Interface: 1;
Mixing Scale: 8X8 Mixing Scale:;
Mixing Scale 1: 4-Channel Analog Inputs, 4-Channel Dante Inputs;;
Mixing Scale 2: 4-Channel Analog Outputs, 4-Channel Dante Outputs;
Digital Processing Function: Gain Adjustment; 5 Peq; Compressor; Section 31 Geq;
Analog Max. Gain: 26dB;
Quantification: 24-Bit;
Sample Rate: 48 K;
Frequency Response(20~20 kHz): +0.2dB;
Phantom Power (Per Input): 48V;
Max. Level (Input/Output): +8dbu, Balance;
Thd+N: Less Than 0.002% @4dbu;
Background Noise (a-Weighted): -97dbu;
Input Impedance (Balance Type): 20K Ohm;
Output Impedance (Balance Type): 100 Ohm;
|
Noise: Less Than -90dbu When Gain Is 0dB;
Application: Commercial, Home, Studio;
THD: Less Than 0.01%;
Microphone/Line Input: Balanced Type,3 Pin Interface with RF Filter;
Phantom Power: +48V;
Mic/Line Gain: 0dB;
Input Impedence: Greater Than 6800ohm,The Gain Can Be Set to Any Va;
Equivalent Input Noise: -115dbu(Gain:+40dB);
Maximum Input Electrical Level: +8dbu @ 0dB Gain, -16dbu @ +25dB Gain,-31dbu @ +40;
Output Type: Balance Circuit,It Will Be Mute When Loses Single;
Output Gain: 0dB;
Output S/N: Less Than -90dbu When Gain Is 0dB;
Max Output Electrical Level: +12dbu;
|
