| Specification |
Type: Professional Amplifier;
Usage: AV, KTV System, All;
Used For: Professional;
Tube Type: Transistor Amplifier;
Function: Post Amplifier, Amplifier Combined, Pre-amplifier;
Sound Channel: 2 to 8 Channels;
Output Number: 2 to 8 Channels;
Voltage: AC 220V;
Element Number: Push-Pull Amplifier;
Conductive Mode: Class Td;
4 Host 1 Standby: Input/Output: 8 Channels;
3 Host 1 Standby: Input/Output: 6 Channels;
2 Host 1 Standby: Input/Output: 4 Channels;
1 Host 1 Standby: Input/Output: 2 Channels;
|
Type: Professional Amplifier;
Sound Channel: 2;
Voltage: AC 110V;
Output Power: 2*500W at 4ohm; or 1*600W at 8ohm Bridged, 1*600W;
Output: 100V or 4 - 16ohm, DSP Software Selectable;
Frequency Response: 20 - 20,000 Hz, +/- 0.5dB at 1W, 8ohm;
Thd: Less Than 0.1% at 1W to Full Load;
S/N Ratio: 6dbu and 0dbu at 94dB;
Input EQ: 5 Bands;
Output EQ: 9 Bands;
Cooling: Internal 12VDC Fan, Extensive Heat Sinking;
Display: 240*240 Res, IPS Colored;
Dante Interface: 2 Channel;
Power Requirements: 180-264V AC, 50/60 Hz;
Built-in Dimensions: 1 U Rack 19 Inch;
|
Type: Professional Amplifier;
Sound Channel: 4;
Voltage: AC 110V;
Channels: 4;
Bridge Power: 2*3200W@8Ω;
Minimum Output Impedance: 4Ω for Each Channel;
Input: Balanced Input, 4*XLR;
Output: 4*Spoken; 4*Terminal;
Maximum Input Level: 20dbu/7.75V;
Sensitive: 12dbu:31dB/6dbu:37dB/0dbu:43dB;
Signal to Noise Ratio: 103dB@12dbu/ 1kHz;
Frequency: 20Hz-20kHz (±0.5dB) @1W, 8Ω;
Thd+N: <0.08%@1W;
Sampling Rate: 48K/24bit;
Dante(Optional): 4 Dante Channels;
Display: 4.3 Inch IPS Capacitive Touch Screen;
|
Type: Professional Amplifier;
Voltage: AC 110V;
Power Supply: 220-240VAC, 50Hz/60Hz (IEC) or 12VDC Back up Power;
Audio Source: USB Player, DAB Tuner and Bluetooth Receiver;
Bluetooth Version: 5.0; Compatible 4.2 and V2.1EDR;
Controls: Treble, Master, MP3, Aux, Mic;
Microphone Inputs: 6.3mm Jack (Unbalanced) and XLR (Balanced);
Line Input: 2 X RCA (Summed to Mono);
Line Output: 1 X RCA;
Speaker Outputs: COM, 100V/70V and 4-16 Ohms (Phoenix Terminals);
Antenna Connection: Screw Terminal;
Power Output: 30W;
Weight: 2.16kg;
|
Type: Professional Amplifier;
Sound Channel: 4;
Voltage: AC 110V;
Channels: 4;
Bridge Power: 2*3200W@8Ω;100V(2*1250W);
Minimum Output Impedance: 4Ω for Each Channel;
Input: Balanced Input, 4*XLR;
Output: 4*Spoken; 4*Terminal;
Maximum Input Level: 20dbu/7.75V;
Sensitive: 12dbu:31dB/6dbu:37dB/0dbu:43dB;
Signal to Noise Ratio: 103dB@12dbu/ 1kHz;
Frequency: 20Hz-20kHz (±0.5dB) @1W, 8Ω;
Thd+N: <0.08%@1W;
Sampling Rate: 48K/24bit;
Dante(Optional): 4 Dante Channels;
Display: 4.3 Inch IPS Capacitive Touch Screen;
|
