| Specification |
Condition: New;
Automatic Grade: Semi-Automatic;
CNC or Not: CNC;
Voltage: 380V;
Repeat Positioning Accuracy: Plus/Minus 0.02mm;
Spindle Power: 3.0kw;
Total Power: 6.0kw;
Scope: Window Machine;
|
After-sales Service: 24 Hours Technical Support by Phone, Email or Skyp;
Warranty: 1years Warranty Period;
Condition: New;
Automatic Grade: Automatic;
CNC or Not: CNC;
Voltage: 380V;
Input Power: 3.0kw;
Working Air Pressure: 0.5~0.8MPa;
Number of Drill Heads: 10;
Drilling Diameter: Ф1~7mm;
Minimum Hole Spacing: 22mm;
Maximum Hole Spacing: 380mm;
Spindle Speed: 1, 400rpm;
Dimensions: 3, 100*1, 200*960mm;
|
After-sales Service: 24 Hours Technical Support by Phone, Email or Skyp;
Warranty: 1years Warranty Period;
Condition: New;
Automatic Grade: Automatic;
CNC or Not: CNC;
Voltage: 380V;
Customizable Processing Length: Yes;
Input Power Supply: 380V/50Hz;
Spindle Power: 3.5kw;
Spindle Speed: 18, 000rpm;
Working Air Pressure: 0.5~0.8MPa;
X-Axis Lateral Travel: 1, 200mm;
Y-Axis Longitudinal Travel: 250mm;
Z-Axis Vertical Travel: 250mm;
X-Axis Feed Rate: 0~60m/Min;
Y-Axis Feed Rate: 0-15m/Min;
Z-Axis Feed Rate: 0-15m/Min;
Worktable Position: -90°, 0°, +90°;
Tool Holder: Er25 -Ф8mm;
Dimensions: 2, 200*1, 500*1, 950mm;
|
After-sales Service: 24 Hours Technical Support by Phone, Email or Skyp;
Warranty: 1years Warranty Period;
Condition: New;
Automatic Grade: Automatic;
CNC or Not: not CNC;
Voltage: 380V;
Saw Cutting Motor: 3.8kw;
Working Air Pressure: 0.6~0.8MPa, 0.6-0.8MPa;
Motor Speed: 1, 400r/Min;
Rated Oil Pump Pressure: 20MPa;
Total Corner Assembly Pressure: 80kN;
Oil Tank Capacity: 40L;
Corner Assembly Cylinder Stroke: 0~50mm;
Processing Profile Height: Maximum 170mm;
Dimensions: 2, 000*1, 900*1, 300mm;
|
After-sales Service: 24 Hours Technical Support by Phone, Email or Skyp;
Warranty: 1years Warranty Period;
Condition: New;
Automatic Grade: Automatic;
CNC or Not: CNC;
Voltage: 380V;
Motor Speed: 2, 800r/Min;
Working Air Pressure: 0.5~0.8MPa;
Saw Cutting Motor: 2*2.2kw;
Air Consumption: 60L/Min;
Saw Blade Specifications: Ф500×Ф30×4.4/Z=120;
Saw Cutting Length 90&Deg: Maximum 4, 200mm/Minimum 360mm;
Saw Cutting Length 45°: Maximum 4, 200mm/Minimum 360mm;
Cutting Width × Height 45°: Maximum 150mm*150mm;
Cutting Width × Height 90°: Maximum 150mm*200mm;
Saw Cutting Angle: 90°, 45°;
Repeated Fixed-Length Accuracy: ≤0.10mm;
Cutting Angle Error: ±5 ′;
Cutting Surface Roughness: Ra12.5μm;
Dimensions: 5, 700*1, 750*1, 950mm;
|
