What is Smooth Surface Finish Single Cavity Plastic Injection Mold/Mould/Tooling for Car Auto Parts
Price
Min. Order Reference FOB Price
1 Piece US$2,000.00-10,000.00 / Piece
Sepcifications
- Shaping Mode Injection Moulds, Injection Mould
- Surface Finish Process Painting, Polishing
- Mould Cavity Multi Cavity, Single Cavity
- Plastic Material ABS, TPE
- Process Combination Type Single-Process Mode
- Application Car, Household Appliances, Furniture, Commodity, Electronic, Home Use, Hardware
- Runner Hot Runner, Cold Runner
- Design Software Ug, Autocad
- Installation Fixed
- Certification ISO, CE, Ts16949, ISO, FDA
- Standard HASCO
- Customized Customized
- After-sales Service Yes
- Transport Package Wooden Cases/Air/Sea
- Specification 550*450mm
- Trademark Customized
- Origin China
- Core and Cavity Ma DIN2312, 2738, 2344, 718h, S136h, 8407, Nak80, SKD
- Hardness of Steel 46~56HRC
- Mold Gate Fan Gate, Sub Gate, Pinpoint Gate, Valve
- Ejection System Stripper Plate, Lifter, Push Bar, Ejection Pin
- Mold Life 300, 000-1, 000, 000 Shots
- Mold Base Lkm, Hasco, Dme or Upon Customer's Requirement
Product Description
Smooth Surface Finish Single Cavity Plastic Injection Mold/Mould/Tooling For Car Auto Parts We will make your project working with highest efficiency, competitive cost, high performance and perfect quality of plastic injection mould. Name Plastic Injection Mould Brand Name HOWE MOULD Mould ...
-
What Are Bubbles in Injection Molded Products?By Dongguan Howe Precision Mold Co.,LTD on 13/08/2024In injection molding, bubbles are not a common defect in general small workshops. Bubbles mainly occur in non-large transparent products; small transparent products are not prone to bubbles, while non-transparent products typically do not have specific requirements. Today, we will focus on bubbles in injection molding as we continue our exploration of molding defects. -
How to Solve the Burrs/Flash on Plastic Parts FastBy Dongguan Howe Precision Mold Co.,LTD on 04/07/2024Many of us in the manufacturing world know all too well – those pesky burrs and flashes on plastic parts. They're like the tiny gremlins of production, popping up and causing all sorts of headaches. But don't worry, we're here to tackle this issue head-on and find some fast, effective solutions. -
What Are Sink Marks in Plastic Injection Mold?By Dongguan Howe Precision Mold Co.,LTD on 11/09/2024Sink marks are some kinds of depression on the surface of the plastic part due to the shrinkage of the material underneath. Sink marks most commonly occur on a surface that has ribs, bosses, and other voluminous features on the rear side of the moulding. All plastics shrink as they freeze off, some more than others. One of the things you can do during the design phase is to identify where these injection molding sink marks are going to be and choose a material that doesn’t shrink as much. Or you can even add something to the plastic material like glass fibers or you can put talcum powder in and it will mitigate the shrinkage quite a bit.