| Specification |
Network Scanning: Support Network;
Type: Wearable;
Interface Type: 2.4G Bluetooth;
Scan Speed: 300 scans/sec;
Scan Element Type: CMOS;
Iterm Name: Ring Finger Wearable Wireless 1d 2D Reader Barcode;
CPU: 32bit;
Startup Time: 750ms;
Resolution: 3mil;
Depth of Field: 55-350mm;
Scan Mode: Trigger Mode Auto Sense Mode;
Prompting Mode: LED Indicating Lamp Buzzer;
Motion Tolerance: 25cm/S;
Print Contrast: 25%PCS;
Ambient Light: 70000lux;
Weight: 35g Without Cable;
Charging Cable: Type C;
Battery Capacity: 350mAh;
Battery Charging Time: About 1.5 Hours;
Continuous Working Time: 3hours;
|
Network Scanning: Support Network;
Type: Handheld;
Interface Type: USB;
Scan Speed: 300 scans/sec;
Scan Element Type: CMOS;
RAM+ROM: 2GB+16GB;
Expand Memory: Micro SD (TF) Supports up to 128GB;
System: Android 13;
Gnss: Support GPS, Galileo, Glonass, Beidou;
Printing Speed: 70mm/S;
Print Points: 384 Dots;
Paper Width: 58mm;
|
Network Scanning: Support Network;
Type: CMOS;
Interface Type: USB(USB-KBW, USB-COM), TTL, RS232, RS485, Wiegand;
Scan Speed: 35cm/s;
Scan Element Type: CMOS;
High Light: laser handheld scanner, laser wireless barcode sc;
|
Network Scanning: Support Network;
Type: CMOS;
Interface Type: USB(USB-KBW, USB-COM), TTL, RS232, RS485, Wiegand;
Scan Speed: 65CM/S;
Scan Element Type: CMOS;
High Light: laser handheld scanner, laser wireless barcode sc;
|
Network Scanning: Support Network;
Type: Flatbed;
Interface Type: USB;
Scan Speed: 200 scans/sec;
Scan Element Type: CMOS;
Protocol: USB HID;
Speed: USB Full Speed (12 Mbps);
Support System: Window,Linux,Android;
Smart Card Read /Write Speed: 9,600-223200 BPS;
Standard: ISO/IEC 7816 Class B (3V);
Card Connector Type: Contact;
Supply Current: Max. 50 Ma;
Number of Slots: 1 ID-1 Slot;
|