| Specification |
After-sales Service: 12month Warranty,Lifelong Technical Service;
Function: Inertial Sensors Testing;
Display: Digital;
Usage: Electric Component Tester, Inertial Components R&D;
Type: Motion Simulator;
Environment: Room Temperature;
Warranty: With Warranty;
Power Source: 380VAC/50Hz;
Weight: 90kg;
Installation: Direct Connected;
Customized: Customized;
Load Weight: 5kg;
Angular Position Positioning Accuracy: ≤±10'';
Angular Rate Range: 1°/S~300°/S;
Angular Rate Accuracy and Stability: 1°/S<ω<10°;
Load Mounting Tabletop: Not Less Than φ300mm;
Tabletop Flatness: ≤0.03mm;
Tabletop End Face Runout: ≤0.03mm;
Tabletop Mounting Screw Holes: M8 (Inlaid Wire Thread Inserts) Spacing 25mm;
Communication Method: RS232;
Power Supply: 220V±10% 50Hz;
Ambient Temperature: -10℃~35℃;
Ambient Humidity: ≤80%Rh;
|
After-sales Service: Online;
|
After-sales Service: 1 Year;
Display: Digital;
Weight: 0-10Kg;
Customized: Customized;
Output Voltage: 30kv ~ 90kv;
Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz;
High Test Capacity: 5.5μf;
Measuring Length Range: Over-Current Protection.;
Measuring Method: Low-Voltage Pulse Method, Flash Current Method, Mu;
Blind Spots: 0 ~ 5m or No Blind Spots;
Standby Time: Can Be Used Continuously for About 6 Hours;
Control Unit Weight: 7kg;
|
After-sales Service: 1 Year;
Display: Digital;
Type: WESHINE;
Environment: WESHINE;
Warranty: WESHINE;
Power Source: WESHINE;
Weight: 0-10Kg;
Installation: WESHINE;
Customized: Customized;
Output Voltage: 30kv ~ 90kv;
Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz;
High Test Capacity: 5.5μf;
Measuring Length Range: Over-Current Protection.;
Measuring Method: Low-Voltage Pulse Method, Flash Current Method, Mu;
Blind Spots: 0 ~ 5m or No Blind Spots;
Standby Time: Can Be Used Continuously for About 6 Hours;
Control Unit Weight: 17kg;
|
After-sales Service: 1 Year;
Display: Digital;
Weight: 0-10Kg;
Customized: Customized;
Output Voltage: 30kv ~ 90kv;
Output Frequency: 0.1Hz, 0.05Hz, 0.02Hz;
High Test Capacity: 5.5μf;
Measuring Length Range: Over-Current Protection.;
Measuring Method: Low-Voltage Pulse Method, Flash Current Method, Mu;
Blind Spots: 0 ~ 5m or No Blind Spots;
Standby Time: Can Be Used Continuously for About 6 Hours;
Control Unit Weight: 7kg;
|