| Specification |
Type: Wireless Alarm Host;
Function: Networked;
Usage: Fire;
Alarm Volume (within 1m): ≥80dB;
Networking Mode: GSM Dial-up;
Receive Frequency: 433.92MHz;
Wiring Mode: Sub-Line System;
Main Power: 110 VAC or 220VAC;
Loop Point: 128 Address Devices;
Batteries: 2*12V, 2.3A;
Temperature Range: -10 to 55°c;
Relative Humidity: 5 to 95%;
Terminal Blocks Rating: 12 to 18 AWG (0.75 to 2.5 mm2);
|
Type: Fire Alarm Panel;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥90dB;
Wiring Mode: 2 Wires System;
Product Name: Ansorl Fire Alarm System;
Main Power Supply: 90 to 270VAC, 50Hz;
Backup Battery: 2 PCS Lead Acid Battery;
Power Supply Rating: 3 AMPS @ 24VDC;
Initiating Device Circuits: 4 - 16 Detection Zones;
Notification Appliance Circuits: 1 - 4 Sounder Lines;
Zone Capacity: 25 - 30 Detectors;
Disabled Function: Yes;
Emergency Evacuate Function: Yes;
Relay Output: Fire & Fault & Supervisory;
Relay Contact Rating: 2A & 30VAC, Resistive;
Mode Selection: Auto & Manual;
Standard: EN54-2 & EN54-4;
Dimension: 440X370X100 mm;
Application: Office, Factory, Warehouse, Apartment, Hotel, etc.;
|
Type: Fire Alarm Panel;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥90dB;
Wiring Mode: 2 Wires System;
Product Name: Ansorl Fire Alarm System;
Main Power Supply: 90 to 270VAC, 50Hz;
Backup Battery: 2 PCS Lead Acid Battery;
Power Supply Rating: 3 AMPS @ 24VDC;
Initiating Device Circuits: 4 - 16 Detection Zones;
Notification Appliance Circuits: 1 - 4 Sounder Lines;
Zone Capacity: 25 - 30 Detectors;
Disabled Function: Yes;
Emergency Evacuate Function: Yes;
Relay Output: Fire & Fault & Supervisory;
Relay Contact Rating: 2A & 30VAC, Resistive;
Mode Selection: Auto & Manual;
Standard: EN54-2 & EN54-4;
Dimension: 440X370X100 mm;
Application: Office, Factory, Warehouse, Apartment, Hotel, etc.;
|
Type: Fire Alarm Panel;
Function: Networked;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥90dB;
Wiring Mode: 2 Wires System;
Product Name: Ansorl Fire Alarm System;
Main Power Supply: 90 to 270VAC, 50Hz;
Backup Battery: 2 PCS Lead Acid Battery;
Power Supply Rating: 3 AMPS @ 24VDC;
Initiating Device Circuits: 4 - 16 Detection Zones;
Notification Appliance Circuits: 1 - 4 Sounder Lines;
Zone Capacity: 25 - 30 Detectors;
Disabled Function: Yes;
Emergency Evacuate Function: Yes;
Relay Output: Fire & Fault & Supervisory;
Relay Contact Rating: 2A & 30VAC, Resistive;
Mode Selection: Auto & Manual;
Standard: EN54-2 & EN54-4;
Dimension: 440X370X100 mm;
Application: Office, Factory, Warehouse, Apartment, Hotel, etc.;
|
Type: Security Alarm Host;
Function: Software;
Usage: Fire, Smoke;
Alarm Volume (within 1m): ≥90dB;
Receive Frequency: 80Hz-18kHz;
Wiring Mode: Sub-Line System;
Power: 760W;
Product Name: Main Control Unit;
Main Supply Voltage: AC 220-240V, 50/60Hz;
Backup Power Supply Voltage: AC 220-240V, 50/60Hz;
Main Power Supply Fuse: T10ah 250V;
Mic Input Sensitivity: -59+/-3dbv;
Input Impedance: 250 Ohm;
Channels: 2;
Aux Input Sensitivity: 1V(0dbv);
Aux Input Impedance: 10K Ohm;
Call Input Signal: 2V;
Package Dimension (W*H*D): 580*279*552mm;
|
