File Compactor / Mobile Shelving System is
a cost effective way of increasing storage capacity and utilizing valuable floor space, which can double storage capacity compared to conventional static shelving.
It moves along floor tracks allowing the aisle to be moved so that the required shelves can be accessed, so only one aisle is needed. Terms applied to shelving or storage units 
fitted with wheeled traction. It allows greater storage capacity of space versus  conventional or stationary shelving system. 
The File Compactor allows one or more 
cabinets to be moved easily by hand crank or electric motor.

MAIN APPLICATION:
It is widely used in Offices Libraries,Archives, Retail Stockrooms, Medical Records, Office filing and Museums for file storage and are designed to be easily re-located with no floor fixing.

MAJOR ADVANTAGES:
• Space Efficiency: Floor space efficiency reaches 80% and
 storage space at 60-80%
• Orderliness: The different available accessories enable different articles
 to be classified when archived or stored
• Neat and Clean: As there are no aisles, the file compactor 
forms a closed block, reduces the amount of dust and dirt 
entering.
• Security: The security lock for lockers guarantees that 
access is restricted to authorized personnel.
• Versatile: A variety of accessories of shelves and sizes mean 
that shelving can be adapted to meet all to meet all types of requirements.
• Aesthetics: The file compactor can blend in any working environment due to materials quality and 
finishes.


• Strength: The installation is made of steel components designed to ensure its overall strength and 
rigidity
• Minimum Effort: The design of the wheel or hand crank ensures less effort of shelf movement
• Collapsible: Its fully modular construction makes the system easy to handle, assemble and 
disassemble.

MATERIAL:

1.Anti dust board:   0.8-1.0mm                    7. Divider:           10mm                
2.Top panel:        0.8-1.0mm                    8. Shelf:             0.8-1.0mm                   
3.Door panel:       0.8mm                       9. Upright:           1.2-1.5mm                                   
4. Side cover panel:  0.8-1.0mm                   10.Base:             2.5mm
5. Rail channel:     2.35mm                      11.Seal:              20mm            
6. Guide Rail:       20*20mm solid square steel    12.Hanging panel:     1.0m

PRE TREATMENT AND POWDER COATING

           

As a part of the "VIKTOR - GOOD AND GREEN POLICY",we have standardized all our finishing colors as
"LEAD FREE COLORS"Here is a list for standard colors that have been commonly used in our system:


 

VIKTOR racking systems are subject to the highest standard of paint finish using the new pre-phosphate
technology and drying ovens for RAL powder coating paint polymers. Our Racking and Shelving products
are epoxy powder coated and oven baked for scratch and corrosion resistance. The coating is applied
electro statically and is then cured under heat to allow it to flow and form a continuous protective film.
The process involves the following steps:
 
Pre-treatmentDryingElectrostatic Powder ApplicationOven Baking and curingInspection
The basis of any good coating is preparation. Parts are loaded on a powered overhead conveyor and
transported to the pretreatment station.
 
Pretreatment: The pretreatment of the parts is essential to remove oils and greases. After
cleaning and decreasing, parts are rinsed and dipped in a phosphate solution which favors the
adhesion of the powder and forms a preventive film against corrosion. The steel is then washed
with demineralized water that reduces the presence of chemical salts on its surface.

 
Drying: The parts are conveyed to the dry-off oven to ensure all moisture entrapped in
any recesses is thoroughly dried before the application of the finish coat. They are then
 conveyed to the electrostatic tunnel.
 
Electrostatic Powder Application: Powder is applied electrostatically to make sure it wraps all the part.
 
Oven Baking & Curing: To obtain the final solid, tough and abrasion resistant coating, the powder
Coated items are placed in an oven for 10 to 15 minutes and heated at 200° C. Under the influence of
heat, thepowder is fully cured.
 
Inspection: The product passes an inspection check where any defects are detected and
corrected. The powder coating is applied in a thickness of 50-80 microns to ensure full coverage of the steel.

Capability
to paint a single piece of 12 m length in a single run

CREDENTIALS

ISO 9001:2000 Quality Management System certified in 2002
Ø  ISO 14001:2004 Environment Management System certified in 2006
Ø  European Norm complied
Ø  EMR system is CE certified





WARRANTY POLICY

Choosing VIKTOR means quality. Our warranty is valid for all installations fulfilling the relevant
norms and application requirements. VIKTOR warrants that all racking and storage systems
manufactured and shipped by VIKTOR are with a warranty term of one year (12 months) upon the
boarding date.


VIKTOR will replace or repair defective products except that:
 
Products that have been modified by the userProducts Were not installed or maintained according to manual or specification accompaniedProducts were subject to unusual physical stress, improper operation,or negligenceProducts were non-defective or product defects were not related to VIKTOR product
functionality,including third-party modifications
Other damage caused by customers themselves

***


"SAVE SPACE AS WELL AS YOUR COSTS"