Light duty shelving         

INTRODUCTION:

•Ideal for goods with small size and light weight,and widelyused in the electrical, light industry, supermarket, culture and education industry.
•All-purpose angle steel upright Cut-in composite usually with steel panel.
•Simple and quick assembled and dismantled
•Height of each layer can be adjusted freely
by pitch of 50mm.
•Loading and unloading by hand.
•Loading capacity less than 200kg per level.                             

Longspan/medium duty Shelving system

INTRODUCTION:

•Incorporates a wide range of beams and frames making it easy to customize to meet your preciseneeds, from small components to heavy cartons.
•A number of high-performance accessories are also available to extendthe versatility of the Longspan system.
•Loading capacity less than 200kg per level.
 
Steel racking components (elements) by VIKTOR are designed and manufactured to a guaranteed minimum yield point of no less than 235 (N/mm2) and tensile strength of no less than 370 (N/mm2)

DESIGN STANDARDS
 

FRAME SPECIFICATION

UPRIGHT with hexagon-shaped or water-drop holes at 50mm, pitch is cold roll-formed into a C-section with returned flanges for exceptionally stronger frame load capacity.

VIKTOR frames are designed with a safety factor of 1:1.96 for yield on all published frame loading figures.
 
BEAM SPECIFICATION

Specially designed the boxed beam sections with purpose curved lips to ensure the two sections are interlocked together as well as capable of taking maximum loads with minimum deflection. The boxed sections are welded at each end to a three,four or five hooks steel connector, thus giving a far more secured and stronger fitting on the uprights, adjustable at 50mm pitch levels.

Special designed S-hook Safety Locks made of steel material complete the beam design to prevent accidental removal; this specially designed steel safety lock does not deform as easily as some other steel safety locks when pulled out for repositioning of beams.

VIKTOR beams are designed with a safety factor of 1:1.65 for yield on all published Beam Load figures.
 

PRE TREATMENT AND POWDER COATING

           

As a part of the "VIKTOR - GOOD AND GREEN POLICY",we have standardized all our finishing colors as "LEAD FREE COLORS"Here is a list for standard colors that have been commonly used in our system:
 

VIKTOR racking systems are subject to the highest standard of paint finish using the new pre-phosphate technology and drying ovens for RAL powder coating paint polymers. Our Racking and Shelving products are epoxy powder coated and oven baked for scratch and corrosion resistance. The coating is applied electro statically and is then cured under heat to allow it to flow and form a continuous protective film. The process involves the following steps:
 
Pre-treatment DryingElectrostatic Powder Application Oven Baking and curingInspection
The basis of any good coating is preparation. Parts are loaded on a powered overhead conveyor and transported to the pretreatment station.
 Pretreatment: The pretreatment of the parts is essential to remove oils and greases. After cleaning and decreasing, parts are rinsed and dipped in a phosphate solution which favors the adhesion of the powder and forms a preventive film against corrosion. The steel is then washed with demineralized water that reduces the presence of chemical salts on its surface.  Drying: The parts are conveyed to the dry-off oven to ensure all moisture entrapped in any recesses is thoroughly dried before the application of the finish coat. They are then conveyed to the electrostatic tunnel. Electrostatic Powder Application: Powder is applied electrostatically to make sure it wraps all the part.  Oven Baking & Curing: To obtain the final solid, tough and abrasion resistant coating, the powder coated items are placed in an oven for 10 to 15 minutes and heated at 200° C. Under the influence of heat, the powder is fully cured.  Inspection: The product passes an inspection check where any defects are detected and corrected. The powder coating is applied in a thickness of 50-80 microns to ensure full coverage of the steel.

Capability

to paint a single piece of 12 m length in a single ru


CREDENTIALS

WARRANTY POLICY


ISO 9001:2000 Quality Management System certified in 2002
Ø  ISO 14001:2004 Environment Management System certified in 2006
Ø  European Norm complied
Ø  EMR system is CE certified
Choosing VIKTOR means quality. Our warranty is valid for all installations fulfilling the relevant norms and application requirements. VIKTOR warrants that all racking and storage systems

manufactured and shipped by VIKTOR are with a warranty term of one year (12 months) upon the boarding date.

VIKTOR will replace or repair defective products except that:
 
Products that have been modified by the userProducts were not installed or maintained according to manual or specification accompaniedProducts were subject to unusual physical stress, improper operation,or negligenceProducts were non-defective or product defects were not related to VIKTOR product functionality,including third-party modificationsOther damage caused by customers themselves


***


"SAVE SPACE AS WELL AS YOUR COSTS"