3020T model:
Machine Size: 550x400x350mm
Movement length: XYZ=300x200x50mm
Max workpiece thickness: <=65mm
Work table size: 450x240mm
Material: 6061+6063 aluminium alloy
Sliding unit: X-axis=13mm round rail, Y-axis=16mm round rail, Z-aixs=12mm round rail
Transmission unit: Two spin 1204 trapezoidal screws
Stepper motor: 57 series 2phase new stepper motors
Engrave accuracy: Better than 0.05mm
Resetting accuracy: Better than 0.05mm
Spindle motor: 200W low noise American second hand motor
Spindle speed: 7800 rpm
Max unload speed; 4000mm/min
Engrave speed: 0-2000mm/min
Weight: 21kgs contain packing
Main application: Engrave for PVC, PMMA, plastic, and wood, usually for engrave for nonmetal, also it can used for simple PCB, metal Label etc

3040T+D model:
Travel length: XYZ=275x385x60mm
Max workpiece thickness: <=70mm
Machine size: 610x480x400mm
Work table size: 530x320mm
Material: 6061+6063 aluminium alloy
Sliding unit: Cr coated round rail+linear bearing/ slide block, XY16mm, Z12mm
Transmission unit: Special high precision 1404 double spin trapezoidal screws
Stepper motor: NEMA23, 2phase 1.8A new stepper motors
Spindle motor: 200W low noise American second hand motor, ER11 3.175mm collect(two bearing was changed to new ones)
Spindle speed: 500-8000 rpm can be adjust
Spindle radial error motion: ≤ 0.03mm
Max unload speed: 0-4000mm/min
Engrave feed speed: 300-2500mm/min(according to the material)
Resetting accuracy: Better than 0.05mm
Support software: Mach3, EMC2, KCAM4, dB25 parallel cable
Weight: Round 28kgs contain packing(Packing size: 600x460x380mm)
Accept engrave file: G code/tab/nc/ncc/TXT
Main application: Engrave for Wood, bamboo, normal PCB, PVC, PMMA, plastic, bamboo, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working, but not milling working
Also we can offer 3040Z+S with 0.8 Kw water cooled spindle+1.5Kw inverter
6040Z+D model:

Machine Size: 870x620x450mm
Movement length: XYZ=388x588x68mm
Max workpiece thickness: <=100mm
Work table size: 735x440mm
Material: 6061+6063 aluminium alloy
Sliding unit: X and Z axis Cr coated round rail 16/12mm, Y axis support rails
Transmission unit: The X/Y/Z axis are all new 1605 ball screws, and good quanlity coupler
Stepper motor: 57 series 2phase 2.5A new stepper motors
Spindle motor: 200W second American hand motor, , ER11 collet, radial run out<=0.02mm
Resetting position accuracy: Better than 0.05mm
Spindle speed: 500-8000 rpm
Max unload speed; 0-4000mm/min
Engrave speed: 300-2500mm/min according to the material
Support software: Mach3, EMC2, KCAM4, dB25 parallel cable
Weight: Round 42kgs contain packing
Accept engrave file: G code/tab/nc/ncc/TXT
Main application: Engrave for Wood, bamboo, normal PCB, PVC, PMMA, plastic, bamboo, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working, but not milling working

6040Z+S model: 0.8Kwwater cooled+1.5Kw VFD
Machine Size: 880x690x520mm
Movement length: XYZ=400x580x60mm
Max workpiece thickness: <=100mm
Work table size: 750x480x20mm
Sliding unit: X-axis=20mm linear shaft, Y-axis=16mm support rail, Z-aixs=13mm linear shaft
Transmission unit: The X/Y/Z axis are all new ball screws, and good quanlity coupler
Stepper motor: 57 series 2phase new stepper motors
Spindle motor: 800W water cooled spindle
Spindle speed: 24000 rpm
Max unload speed; 5000mm/min
Engrave speed: 300-2500mm/min according to the material
Support software: Mach3, EMC2, KCAM4, dB25 parallel cable
Weight: Round 56kgs contain packing
Accept engrave file: G code/tab/nc/ncc/TXT
Main application: Engrave for Wood, bamboo, normal PCB, PVC, PMMA, plastic, bamboo, duotone board(ABS)and etc nonmetal, also can engrave on gold, silver, copper, aluminium, Pb etc soft metal surface working, but not milling working