HX4-30  Vertical ram extruder for PTFE rod( ram extrusion machine for teflon rod)
RAM Extruder (ram extrusion machine) For PTFE Rod(Φ4-30mm)
Suit for new PTFE material or Recycle PTFE material.
TECHNICAL PARAMETERS
Model: 30T                                Voltage:380V/3PHASE/50Hz
Motor Power:2.2KW               Heater Power:9-15KW        Capacity:70-100KGS              Diameter:4-30mm            Tolerance:+0.2-0.5mm             Rod Number:18-4PCS
30T Vertical ram extruder for PTFE ROD
RAM Extruder For PTFE Rod(Φ4-30mm)
The vertical RAM Extruder is designed with 2 pressure plates, so the ream is effected via a slid pressure plate. The extruder is equipped with two hydraulic cylinders.
The main cylinder serves to move the ram, the additional cylinder serves for retracting the mandrel. Base plate and dosing tray are water-cooled.
The PTFE powder is feed into the rotating hopper via an exact working powder dosing device, controlled by a level indicator. By means of a rotating blade the powder is wiped uniformly into the cavity of the mould.
Range of diameter PTFE 4 to 30 mm, Heating zones 5 zones
The complete electrical control is laterally fastened at extrusion. With a PC touch screen panel all speeds and temperatures can be programmed. Electronics contain the necessary automatic controllers for speeds and temperatures. Five temperature regulators are contained in the plant, four for the extruding pipe and one automatic controller for a mandrel heating element. The maximum output speed of extrusion depends on: Material, Outside diameters and Heating length.
Warranty:According to our standard terms: 12months