Shanghai Jinxiong fabrics Co., Ltd. Is specialized in producing BOM felts, So, our company was increasingly recognized by the market. There are single nylon yarns are imported from the Germany Langsen company. Only this kind of base felt made by high viscosity and high elasticity single nylon yarn can ensure felts still maintain sufficient flexibility and elasticity even through the line pressure of paper making machine is so high, Here is the first weaving preparatory work with automatic adjustmen of the whole yarn tension by yarn stand and the warping machine with good start and brake, so as to ensure that each yarn, s tension is evenness, this is necessry for the evenness of warps, s tension next fabrics weaving process. At present, the company has five TEXO heavy broad width weaving machine omport from Sweden, such as width at 16 meters, 14.5 meters, 11 meters, 8.5 meters, 5 merers. Wide loom fabrics production of the ring fabrics produced by broad width weaving machine, has improved the weaving method of the conventional paper-woven felt, so that felt has soooth surface, good water sieving performance, met the need for the smooth high-speed machining operation. The combing machine with carding, web-forming, pre-needling consisted of Polang, s carding machine with widthof 2.5 meters, France A Selin, s cross-lapping machine, and Feile company, s pre-needle loom. Reasonable design and good performance ensure that the weight difference of the whole fiber net between the middle and both sides is no more than 2 percent. In order to make the raw fabrics have good flexibility and dehydration, the nylon staple fibers imported from French Rhodia Asia and Switzerland, s EMS were selected. This is Austria Feile company, s needling machine. Evenness fiber net on the raw fabrics, the needling machine can work in the front and back of the raw net fabrics at the same time, no need to switch the sife of felt, all of this ensure it has good felts surface. Our company has two needling machine with width at 5.28 m and 7.92 m. The finished felts, s heat setting is the most important process. We adopt the current advanced hot oil setting machine, . Heat oil was injected to copper body by high-pressure pump from boiler, because of the cycle of heat oil in the body of copper, the surface temperature, s difference of cooper body is always maintained in negative 1 degrrr celsius range, thus ensuring the temperature of heat setting was consistent in the whole process.

The multi-functional service vehicles made by United States MORRISON company can take the pressure washing, chemical treatment and singeing processes to meet the different quality requirements of different paper making mills and differernt products.

In our company the six precesses including from laid needling to heat setting were all controlled by computer. The paramenter of each felt is consistent. So it is ensured that quality of our products will always be in stable condition under control. Our products' quality was tested strictly by scientific techniques.

This is the testing on strength and elongation shrinking of raw material. And we also have strength and air permeability test on finished products regularly. In particular, test instrument of Sweden ELOF HANSSON is able to carry out testing about percentage of water hold and water permeability online, so it can provide the basis of objective parameters to the performance of felts and machine running. On the basis of sharing data with users, we'll have in-depth discussions on the quality of blankets. Therefore, we ensure that our products were used in the best condition and paper production procees smoothly.