Steel Pipe Spring Hanger Support
Pipe Spring Hanger SupportLoad range 500-400000 n, displacement range 50-500 mm,temperature range - 20 °C ~ + 200 °C.
Pipe Spring Hanger SupportType: 58H,58V,80V, ZH, TH, VS, TD, BSH
Pipe Spring Hanger SupportMaterial: carbon steel,stainless steel,alloy steel and special material for the special parts.
Pipe Spring Hanger SupportSize:according to the drawing or requirement
PIpe support hangers spring supporter and hangers T1 T2 T3 T4 T5 
producer:CANGZHOU MY PIPE FITTING MANUFACTURING CO., LTD
 CANGZHOU MY PIPE FITTING MANUFACTURING CO., LTDconstant spring hanger is a reliable counter-balance with the counter balance force imposed by a spring coil. By using varying lever arms and spring coil load variation, an accurate constant supporting force is obtained.
These constant spring hangers have been thoroughly time-tested as evidenced by years of successful operation in a large number of steam generating stations, oil refineries and chemical plants throughout the world.
 
CANGZHOU MY PIPE FITTING MANUFACTURING CO., LTD Piping constant spring hangers are available in seven different types and a broad variety of sizes to accommodate a wide range of loads, movements and hanger arrangements.

Product Description
Steel Pipe Spring Hanger SupportType A- Used where ample head room is available. Specific elevation is desirable.
Steel Pipe Spring Hanger SupportType B- Used where headroom is limited. Head attachment is a single lug.
Steel Pipe Spring Hanger SupportType C- Used where headroom is limited. Head attachment is side by side lugs
 
Steel Pipe Spring Hanger SupportType D- Used where the spring hanger is mounted on top of a pair of back to back channels. Provides for adjustment of the load from above the supporting channels
 
Steel Pipe Spring Hanger SupportType E- Used where the spring hanger is mounted on top of a pair of back to back channels. Provides for adjustment of the load from below the supporting channels.
 
Steel Pipe Spring Hanger SupportType F-Used where the spring hanger must be placed under the piping to provide support from the floor or a structural member. Typically supplied with a load flange but can also be supplied with a roller.
 
Steel Pipe Spring Hanger SupportType G-Used were head room is insufficient to accommodate the spring hangerand the necessary associated hardware. Also used where an interference exits directly above the piping system being supported is not centered between the spring hangers, each hanger will then carry its proportional load
 
When pipe moves vertically and when loads on attached equipment are required to remain constant as the pipe moves, then a spring hanger should be considered. Spring hangers are used to provide support to a pipe at a support location at the time the pipe is installed. Pipe movement is generally caused by thermal expansion or contraction of the piping system but it can also result from the movement of the equipment to which the pipe is connected. The underlying objective for using a spring hanger is to minimize the change of load applied by the piping on the connected equipment.
 


Steel Pipe Spring Hanger SupportStandard:ISO, JIS,DIN,GB