The spring balancer is an auxiliary tool for use with the operating tool. Maxsecu series spring balancer use the coil spring energy, cause the suspended tool in a weightlessness, greatly reducing the labor intensity of the operator, improve work efficiency.

Spring balancer widely used in automobile manufacturing, motorcycle manufacturing, household appliances and other machinery manufacturing.

How to use

1. Choose a proper balancer according to the weight of tool and accessory.

2. You should conjunct the secure string when you hang the balancer.

3. Adjust the snail role (No. 1 spare part) until the balance weight of balancer accords with that of the tool. If you adjust it clock wisely. Balancer weight will incerase and on the contrary

Decrease.

4. When you want to put out tools from balancer, you should first draw out the No. 5 spare part and turn 30. Clockwisely, then put it into the trough and lock the No3. Spare part.

5. Don't draw in and let off in vain when nothing has been hung in balancer.

6. You can not slacken the operational tool until you move it to the vertical situation when it be moved horizontally that the slope has exceeded 30...

7. Load should be hung vertically.

Io

Specification

Maxsecu spring balancer have good security, easy to change spare parts, safe load, addtional protection, precise positioning, good balance, simple maintenance, longer service life, accurate adjustment, low wear, etc.

Auto lock ROA3 ROA5

Model

Capacity(kg)

Stroke(M)

Weight(kg)

Min

Max

Standard

ROA-3

1

3

1.9

1.6

ROA-5

3

5

1.9

1.62

The spring balancer of capacity 9-80kg can be achieve remote locking, Replace or repair spring balancer, don't need climbing up the stairs to lock the balancer, can use control panel locking the spring balancer, Every spring balancer is equipped with a locking tool at the factory.

Model

Capacity(kg)

Stroke(M)

Weight(kg)

Min

Max

Standard

ROA-9

5

9

1.8

4.5

ROA-15

9

15

1.8

4.8

1. When use the balancers, the installation height to be reasonable, try to use the balance tower wheel diameter of the largest surface (each pull as far as possible not to use

Stroke limit), this can ensure that the upper and lower hooks in the same force point, to reduce the tower wheel and wire rope wear.

2. Often check the balancer above the car is flexible, whether with the balancer synchronization. Pull up and down as far as possible to maintain the vertical state, the most vertical pull

Can not exceed 30 degrees.

3, the balancer up and down can not be slammer, to prevent the chute.

4. After the work will be reduced to the bottom of the workpiece to prevent the rotation of the object when the rotation caused by loose rope.

5, regularly check the wire rope, add lubricating oil.

6, balancer with a safety rope, the installation must be connected to the balancer, to prevent decoupling, resulting in security incidents.

Model

Capacity(kg)

Stroke(M)

Weight(kg)

Min

Max

Standard

ROA-22

15

22

1.5

8

ROA-30

22

30

1.5

8.5

First, the demolition of the balancer, the first need to adjust the worm counterclockwise rotation, so that coil spring

When you are in a relaxed state, you can do other work.

Second, the monthly response to a balancer for a security check, the main contents are:

1, fasteners are loose.

2, the upper and lower hook with or without bruises, cracks and other defects.

3, the insurance rope is reliable.

4, shell and tower wheel with or without cracks, serious wear and tear.

5, shell device can work properly.

Third, long-term do not have to unload the preservation, pay attention to moisture, so as not to coil spring rust.