Rescue Lighting Rope Application

1. Products in Package
1 PC of 100 M EL Wire Wheel; 1 PC of AC220V/110V Charger; 1 PC of 5M Conneting Lead Wire; 1 PC of Car Electrical Source Plug; 1 PC of Solar Charge Board; 1 Bag of Plastic Binding Strip

2. Application Method
1. Taking out the EL wire wheel.
2. Turn on the switch to judge if there is power or not. The function is On/Off/Twinkle.
3. Under the condition of lighting, EL wire can be pulled or reeled in.
4. To fix EL wire, Plastic binding strip can be used and removed repeatedly.
5. Rotate the handle to reel the EL wire in neatly for easy pulling next time.

3. Three Mode of Charging:
To turn off the switch before charging.

To connect AC220V/110V Charger, Suggest to charge for 3~4 hrs for fully loading. 2Taking out Solar Board, putting it on Sun irradiation area, connecting the Solar Board to charging hole in EL wire wheel with connecting lead wire, and continue charging for 8 hrs to reach 80% eletricity load. Pls. Cut off the connecting lead wire to avoid discharging when you dont charge. 3Car DC12V charge: Lauch car but do not step on accelerator peda, connect lead wire with Car Electrical Source Plug, then connect to Car power. To continune charge for half of hrs and reach 50% electricty load. And cut off the connecting wire while not charging to avoid discharging.

4. Technical Data:
Lighting Color: Blue-green; Weight: 10KGPower: 35WFully loaded eletricity: 3 hrs for continuous lighting, 4 hrs for Twinkling lightingObsevation Distance: 100MMaximum Resist Pull: 20 kgsGlowing in dark time without electricity power: 1-3 hrsLithium batteries: Charging /discharging is over 300 timesEL Wire Life-span: 1000 hrsUnder the condition of battery fully loaded, to keep dry for 30 days and, remaing electricity is 30%Application Condition: DC12VFrequency: 1500HzApplication Limit Temperature: -20- 60

5. Remarks:
EL wire and wheel can not be used in rain or water environment.
Pls. Do not launch engine when connecting with 12V Car power for direct application.
EL wire will not work or have Short circuit if bending angle is less than 45 degree or pulling Strength is beyond required resist of pull.
Pls. Do not remove end parts or Inner equipment to advoid the invalidation of anti water ability and change of resist pull.