Feature:
Digital wireless video monitoring, the picture is vivid.
LED indicates volume, may flash along with the volume.
Digital wireless audio monitoring, sound adjustable.
The demonstration end and photograph end audio to speak, is very convenient. Audio and video external output.
Video menu tries to hit monotonously, in 30 seconds having not pressed any, the menu surface will vanish automatically returns to the inspecting mode.
If the product may be out of the transmission region, the antenna instruct glitter may support the external power supply or battery.
Demonstrates the battery low electricity or the charge instruction.

Item: Specification
Received frequency 2.400GHz~2.483GHz
Video frequency service pattern: PAL/NISC Automatic cut over
Modulation mode: BLETON BBM
Working Temperature: -20~60/ -10~50 degree
View AngleU/D/L/R)(CR>10): 10/30/45/45(Min)
Resolution(DOT): 480(W) x 240(H)

Common Q & A:
Q: Why is the receiver and camera starting without image?
A: Before this product leaving the factory, the kit has already set one-to-one the good frequency, under the normal condition, you turn on the receiver and camera's power source, the receiver can receive the image, if it cannot receive, you may carry on the frequency again to the code establishment, simultaneously holds down the receiver and the camera "POWER" for 5 seconds, presents up to the image until on the receiver screen.
2) Q: Why can't it receive the image when external connection in the certain distance? A: Whether the distance between the camera and the receiver is too far, or the obstacle which is separate, usually using in the spacious 200 meter within scope; In the room it is away from each other and the concrete environment relations are big.

3) Q: Why has it not connected the power source adapter to use Library suddenly static or the receiver black screen?
A: The image is still possible that the camera battery had run out of black screen and power light is off, maybe the receiver run out of power, need to re-charge or connect the power adapter.
4) Q: When is the camera facing the receiver, you can not hear voice and speak each other? A: Hold on the receiver to be speaking on the panel "TALK" button, and note that the camera speaker volume is turned lower.