ZLE is an innovative technology enterprise specializing in R&D hot runner temperature control systems. We have a high level R&D team that has rich practical experience in the field of hot runner controller. Adhering to the spirit of craftsmanship and market demand, we continuously innovate product technology, customizes professional solutions according to customer situations, help customers establish a good impresstion of Chinese products, and tell the story of China well with high-quality products.

Main products:

1, Standard module temperature controller,

2, One card for two zone temperature controller,

3, One card for two zone voltage controller,

4, Touch screen temperature controller,

5, Heater & Thermocouple,

6, Heavy-duty connector & other hot runner mold accessories.

Widely they used in injection molding industries such as electronic communication, medical devices, automotive components, optical components, cosmetic packaging, PET bottle embryos, household appliances, and daily chemicals.

We will comprehensively consider market, cost, technology, quality, efficiency, and service, and wholeheartedly provide customers with the best solutions. We sincerely welcome and thank customers raising questions, exchanging ideas, providing valuable opinions and suggestions!

Control theory
The controller is a equipment of keeping temperature value needed , it detects hot runner plate temperature mainly by MCU,and then internaldata is processed by MCU for appropriately proportional output current to control temperature . Accuracy and stability are determined by the following :

1> Detection temperature : Temperature is determined by sample cycle parameter and data dealing ;
Accuracy is determined by measurement circuit temperature compensation.

2> PID control:  It shows output voltage proportion ,related parameter proportion ,integrate time
and differential time

3> PIDD control : Controls related parameter proportion, integrate time, differential time

4> Auto-tuning :
it provedes functions of leading factors ( hot palymer and heat dissipation ) by analysing
heater'capacitor and mold'thermal parameter . No matter how the enviroment changes , it will be helpful for accurate controlling .

5> Output mode : it can be changed according to enviroment

.PWM(PIDD) mode : it can reach exact temperature controlling , but the noise of power is much bigger than SSR mode ,
.SSR(PID) mode :  the noise of current is small , but controlling temperature capability is weaker than PWM

Specifications of the card

Input Voltage:   AC185V-245V,50/60HZ,15A

Output :        15A,100W-3650W;

Output type :   PWM , SSR

Thermocouple type :  tpye J or K

The coverage of temperature control : 45 ºC-450 ºC

Stability : +0.5%

Controlling type : FUZZY+PIDD auto-tuning + phase angle fired output

Loop break internal detection and automatic enviroment temperature compensation

Softstart function for taking mold'leakage away due to humidity

F1,F2: 250V-15A(special fuse)
F1A,F3: 250-1A

Products function

4>Auto cold junction compensation of thermocouple , in case of relativistic mistakes by ambient temperaturechange

5>Wrong monitor by sensor

The controller can monitor sensor'reverse and open . When some wrong is monitored , it can be adjusted
according to wrong type and controller mode

6>Loop Break Detection;

7>Heater current monitor;

8>Sensor type J / K selection

9>Temperature unit C/F selection

10>Output Interruption Check;

11>Deviation Alarms;

12>Manual Output mode

13> Support modify softstart time;

14>Support Non-touch transfer;

15>It can furnish a full range of error display , making you easily to find the reasons of failure