Basic Info.
Application Field
Industrial Control
Stratification
Operating System Layer
Range of Application
General
Certification
CE, RoHS, FCC
Specification
4GB RAM 32GB eMMC
Product Description
FET3588-C SoM
FET3588-C System on Module (SoM) carries Rockchip's advanced
hybrid processor RK3588 contains quad-core Cortex-A76 and
Cortex-A55 cores, A76 core runs up to 2.4GHz, and A55 core clock
up to 1.8GHz. It has a super advanced engine can support up to 8K
output, quad-screen with different content output; The SoM has been
subjected to rigorous ambient temperature testing, which approve that
it could be a trusted and best option for your high-end applications
and products.
Features:
8K video codec, can support various codec forms;
ISP3.0 up to 48MP;
Various video outputs up to 8K@60Hz;
4 PCIe3.0 and 3 PCIe2.1, up to 8Gbps
Multiple USB3.1 Type-C, can support SATA3.1;
The SoM designed with 4x 100-pin ultra thin connectors, combined connector height is only 1.5mm ;
All processor sources are available on the SoM with good signal integrity and power integrity.
SoM features| Processor | Rockchip RK3588
CPU: quad-core Cortex-A76@2.4GHz+ quad-core Cortex-A55@1.8GHz
NPU: 6TOPS, supports INT4/INT8/INT16/FP16 mixed operating;
GPU:
• Mail-G610 MP4
• OpenGLES 1.1, 2.0, 3.2, OpenCL 2.2, Vulkan1.2
VPU:
Decode:
• H.265, VP9: up to 8K@60fps
• H.264 up to 8K@30fps
• AV1 up to 4K@60fps
Encode:
• H.265/HEVC, H.264/AVC: up to 8K@30fps |
| RAM | 4GB/8GB LPDDR4x |
| ROM | 32GB/64GB eMMC |
| Power input | DC 12V |
| Operating temp | 0ºC ~ +80ºC |
| Package | Board-to-board connector(4*100-pin, 0.4mm pitch, combined height 1.5mm) |
| Interface | Type | QTY | Spec. |
| Video input | MIPI DC
PHY(DPHY/CPHY) | 2 | • Supports DPHY or CPHY;
• 4-lane MIPI DPHY V2.0m, each line up to 4.5Gbps;
• 3-lane MIPI CPHY V1.1, each line up to 2.5Gsps; | Supported MIPI-CSI combo:
2 MIPI DCPHY+ 4 x 2-lane MIPI CSI DPHY
2 MIPI DCPHY+1 x 4-lane MIPI CSI DPHY
2 MIPI DCPHY+2 x 4-lane MIPI CSI DPHY |
| MIPI CSI DPHY | 4 | • 2-lane MIPI DPHY V1.2, each line up to 2.5Gsps;
• two 2-lane DPHY can be combined to a 4-lane DPHY |
| DVP | 1 | • 8/10/12/16-bit standard DVP up to 150MHz input;
• Supports BT.601/BT.656 and BT.1120 VI |
| HDMI RX | 1 | • Supports 3.4Gbps~6Gbps HDMI 2.0;
• Supports 250Mbps~3.4Gbps HDMI 1.4b;
• Supports HDCP2.3 and HDCP1.4 |
| Video output | HDMI/eDP TX | ≤2 | • HDMI/eDP TX are multiplexed, each interface supports x1, x2 and x4;
• HDMI up to 7680x4320@60Hz, supports 3, 6, 8, 10, 12Gbps band widths, supports HDCP2.3;
• eDP is up to 4K@60Hz, supports 1.62Gbps, 2.7Gbps and 5.4Gbps band widths, supports HDCP1.3 |
| DP TX | 2 | • Supports 2 DP TX 1.4a, which is available for USB3.1 Gen1, supports 1/ 2/ 4 lanes;
• Up to 8192x4320@30Hz;
• Supports HDCP2.3, HDCP 1.3 |
| MIPI DSI | 2 | • Supports 2 MIPI DPHY2.0 or CPHY 1.1, up to 4K@60Hz;
• Supports left/ right mode dual MIPI-DSI, available for RGB/ YUV up to 10-bit ; |
| BT.1120 | 1 | • Supports RGB up to 8-bit and rating up to 150MHz;
• Up to 1920x1080@60Hz ; |
| Audio | I2S | ≤4 | • 8 lanes I2S0/I2S1: supports both TX and RX, audio resolution 16~32 bits, sampling rate up to 192KHz;
• 2 lanes I2S2/I2S3: supports both TX and RX, audio resolution 16~32 bits, sampling rate up to 192KHz |
| SPDIF | 2 | • Supports 2x 16-bit data storing;
• Supports biphasic stereo output |
| PDM | 2 | • Up to 8 channels, resolution 16~24 bits, sampling rate up to 192KHz;
• Supports PDM primary receive mode |
| DSM PWM | 1 | Convert PCM data to bitstream digital directly to 1-bit data output, the output digital signal will be filtered to audio signal |
| Network | Ethernet | 2 | 2x GMAC by RGMII / RMII, 10/100/1000Mbps |
| Others | USB3.1 Gen1 | 3 | • USB3.1 Gen1 up to 5Gbps;
• 2 USB3.1 OTG, multiplexed with DP TX(USB3OTG_0 and USB3OTG_1), USB3OTG_o and USB3OTG_1 support USB Type-C and DP Alt;
• 1 USB3.1 Host, multiplexed with PIPE PHY2(USB3OTG_2) |
| USB 2.0 Host | 2 | 2x USB 2.0 Host |
| PCIe 2.0 | ≤3 | Each PCIe2.1 can support 1 lane, up to 5Gbps |
| PCIe 3.0 | 2 | • supports RC and EP, up to 8Gbps;
• support 4 combinations: 1 x4, 2 x2, 4 x1, 1 x2+ 2 x1 |
| SPI | ≤5 | • each controller supports two chip select output;
• Serial master mode and serial slave mode are configurable |
| I2C | ≤9 | • support 7-bit and 10-bit address mode;
• standard mode data transferring rate up to 100K bits/s, and high-speed mode up to 400K bits/s. |
| UART | ≤10 | • built-in 2 64-bit FIFO, can be used for TX and RX respectively;
• supports 5-bit, 6-bit, 7-bit and 8-bit serial data transceiving, baud rate up to 4Mbps;
• all 10 UART can support auto flow control |
| CAN | ≤3 | • 3 CAN2.0B;
• can support CAN standard frame and expanding frame transceiving |
| SATA | ≤3 | • 3 SATA3.0 controllers, PIPE PHY0/1/2 is multiplexed by PCIe and USB_HOST2;
• supports eSATA up to 6Gbps |
| PWM | ≤16 | Up to 16 on-chip PWM, supports capturing mode |
| ADC | ≤8 | 8x 12-bit single-end input SAR-ADC, sampling rate up to 1MS/s |
- Carrier board features:
| Interface | QTY | Spec. |
| MIPI CSI | 5 | • 2x MIPI DPHY V2.0 4 lanes, each lane up to 4.5Gbps; Available on carrier board by 2 26-pin FPC connectors,
OV13850 is the default and recommended camera model;
• 2x MIPI DPHY V1.2 2 lanes, each lane up to 2.5Gbps; Available on carrier board by 3 26-pin FPC connectors,
OV5645 is the default and recommended camera model;
• 1 x MIPI DPHY V1.2 4 lanes, each lane up to 2.5Gbps |
| MIPI DSI | 2 | • Each MIPI-DSI supports 4 lanes output, up to 4K@60fps;
• Forlinx default option: 7'' MIPI DSI module, 1024x 600@30FPS |
| HDMI RX | 1 | Standard HDMI connector, up to 4K@60Hz |
| HDMI | 1 | Standard HDMI connector, up to 7680x4320@60Hz |
| eDP TX | 1 | Can fit 1080p@60Hz display;
Up to 4K@60Hz |
| DP TX | 2 | • 2 DP used together with USB3.1 Gen1, available on carrier board by Type-C connector;
• up to 7680x4320@30Hz; |
| USB3.1 Gen1 | 2 | • available on carrier board by Type-C connector;
• used together with DP TX, up to 5Gbps |
| USB2.0 Host | 1 | • available on carrier board by Type-A USB connector;
• supports high-speed(480Mbps), full-speed(12Mbps) and low-speed(1.5Mbps) |
| PCIe3.0 | 1 | •1x4 lanes PCIe signal is available on carrier board by PCIe x 4 slot;
• supports 2.5Gbps(PCIe1.1), 5Gbps(PCIe2.1), 8Gbps(PCIe3.0) |
| PCIe2.0 | 1 | By PCIe x 1 slot, up to 5Gbps |
| Ethernet | 2 | RJ 45 connector, 10/100/1000 Mbps |
| TF card slot | 1 | Up to 150MHz, supports SDR104 mode |
| Audio | 1 | On-board codec chip, supports earphone output, MIC input and Speaker |
| CAN | 2 | CAN2.0B |
| RS485 | 1 | |
| UART | 1 | Headers with pitch of 2.54mm, baud rate up to 4Mbps |
| 4G/5G | 1 | M.2 4G/ 5G module |
| WiFi& BT | 1 | M.2, supports WI-FI 6 SU and MU-MIMO + Bluetooth 5.3 |
| ADC | 5 | PH2.0 connector, up to 12-bit resolution and 1MS/ s sampling rate |
| RTC | 1 | |
| FAN | 1 | |
| GPIO | 9 | Pin headers with pitch of 2.54mm(3.3V) for 9 GPIO and power of 5V/ 3.3V/ 1.8V |
Address:
No. 2699, Xiangyang North Road, Baoding, Hebei, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Computer Products, Consumer Electronics, Electrical & Electronics, Industrial Equipment & Components
Company Introduction:
As a member unit of CSIA (China Software Industry Association) Embedded System Branch, Forlinx Embedded Tech Co., Ltd. Has gathered groups of professionals with capability to design, prototype and manufacture printed circuit boards, sub-assemblies and complete electronic products. Since the year of 2003, Forlinx is committed to the development of 8051, ARM7, ARM9, ARM11, Cortex-A8, Cortex-A9 and PowerPC based Embedded Systems (system on modules, development kits, evaluation boards, single board computers, software, applications and operating systems for embedded systems) for seven years. Through the 8 years, our devoutness to high quality, low price and comprehensive service has made us flourish in a very competitive marketplace.
On the ground of experiences accumulated from years of practices, our engineers are also enthusiastic in new custom designs. Our custom design service has been so far applied to industrial control equipments, digital consumables, video monitoring and transmitting systems, remote medical monitoring devices, hand-held industrial instruments, communication gateways, T1/E1 communication device applications, etc. No matter it is high-quality and reliable embedded system, or low cost evaluation tools that you need, we are your partner of choice.
