Introduction
DTWX-01G wireless temperature and humidity intelligent inspection system is one of our high-end products" temperature and humidity intelligent inspection system "series of products, is aimed at the low temperature section temperature and humidity measurement record scene which is not easy to use wired equipment, can be used in large storage grain depot, tobacco warehouse, cold storage, ammunition depot, equipment room and other large areas with restrictions on temperature and humidity conditions.

Function
n Accurate measurement: temperature adopts imported temperature and humidity sensor, temperature measurement accuracy is better than 0.1 ºC, humidity 0.8% RH
n Convenient layout: wireless transmission, no need for long-distance wiring, convenient on-site layout measurement.
n Offline measurement: data can be recorded offline in the main station, and uploaded to the system software after booting.
n Automatic analysis: automatically analyze the high and low points of temperature and humidity field, evenness and fluctuation.
n Real-time curve: The computer software can display the real-time temperature and humidity curves of up to 32 sensors at the same time.
n Alarm monitoring: temperature detection function, which can monitor the ambient temperature and humidity, set the upper and lower alarm thresholds, and exceed the automatic alarm.
n Remote transmission: Remotely detect the temperature distribution in the range of 1200m (unobstructed viewing distance).
n Multi-point measurement: a single acquisition base station can support up to 255 temperature measurement points at the same time, and support 32 simultaneous acquisition base stations online.
n Intelligent report: report can be generated automatically according to the regulations.
n Wide temperature range: can be used in -40-85 ºC environment, and can still maintain high accuracy measurement results.
n Multi-terminal support: You can use a tablet, notebook, or desktop to read data, and support 4 terminals to read data from the master station at the same time.
n Portable and durable: battery-powered, no external power supply, small size and easy installation.
n Ultra-low power consumption: low power consumption design, AAA battery power supply, long use time.
Application scenario
Scene 1: Temperature and humidity field measurement:
Used for temperature and humidity verification box (standard box), environmental experiment box, environmental laboratory, incubator temperature and humidity uniformity, fluctuation measurement and calibration.
According to the regulations, the sensors are arranged, and the data of each sensor is wirelessly transmitted to the master station. After the master station analyzes the data, it is transmitted to the temperature field measurement software on the notebook / desktop / tablet in real time. And display the temperature curve, and record and analyze the data according to the requirements of the regulations, so as to issue a report.
Tablet PC, main station, and sensors are all battery-powered and easy to carry, especially suitable for out-of-counter measurement and verification.
Scenario 2: Online / offline monitoring of temperature and humidity:
Used in large areas with limited temperature and humidity conditions such as grain depots, tobacco warehouses, cold storage, ammunition depots, equipment rooms, etc., online / offline monitoring of temperature and humidity data in the space, saving detected historical data, real-time over-range alarm , Calculate the fluctuation and uniformity.
This solution is suitable for measurement in multiple warehouses (temperature zones), and each temperature zone is far away. A master station can be arranged in each temperature zone. Each temperature zone is connected by RS-485 bus, network cable, and optical cable. The data is remote transmission to the temperature monitoring computer room, after setting the alarm threshold, all temperature and humidity data can be monitored online in real time.
Product software:

n Real-time display of temperature and humidity data
n Center point can be configured
n Automatic calculation of fluctuation and uniformity
n Automatic prompting of high and low points of temperature and humidity
n Temperature and humidity curve display
n View the format of collected historical data
n Import and export of collected data into EXCEL table
n Automatically generate calibration certificate
n Upload of data collection base station data
n Sensor calibration
n Data collection base station, sensor power display, low battery alarm
Technical Parameters: