Cube RTK high precision satellite positioning instrument is a high precision satellite positioning equipment using a new technical scheme, small size, light weight, high precision, full function, can be used as a reference station, can also be used as a measuring station, is the preferred equipment for high precision positioning measurement.

Cube RTK built-in full-system full-frequency point or four-system eight-frequency point high-precision satellite positioning module, high-precision measurement satellite receiving antenna, IMU tilt measurement module, 4G CAT1 all-netcom communication module, WIFI communication module, dual-mode Bluetooth 5.2 communication module, LORA data transmission module, PD fast charge module, Built-in large capacity battery up to 16 hours of battery life, support CORS differential and LORA portable base station differential, can also upload RTCM differential data through 4G, WIFI.

 

1, two working modes, the user can choose one of the two modes, reference station mode, measuring station mode.

In measuring station mode, you can choose to turn on or off the inertial navigation tilt measurement function.

2. Reference station mode, users can set how to obtain their own coordinates (automatic convergence/differential positioning),

You can also set up several ways to upload RTCM data (4G/WIFI/LORA, manual NTRIP/ manual MQTT/ Glacier MQTT).

3, measuring station mode, users can set how to obtain differential data (4G/WIFI/BT/LORA,

Glacier NTRIP/ Manual NTRIP/ Glacier MQTT/ Manual MQTT) can also be set to enable or disable tilt measurement.

4. GNSS satellite system, users can customize the enabled constellation, frequency, positioning frequency and low elevation Angle.

5, USB interface working mode, charging, virtual serial port, U disk.

6, wireless communication, 4G, WIFI, LORA, Bluetooth.

Users can use small programs or apps for traffic cards

Status query and recharge, WIFI hotspot setting, LORA communication setting.

7. Positioning data issued by RTK board card can be stored in TF card.

Sending data through Bluetooth and sending data through USB virtual serial port are three operations.

Users can transparently transmit configuration commands to RTK modules through Bluetooth SPP and virtual serial port.